Integrerte forsterkere

Audio Analogue

• Spesifikasjoner

Utgangseffekt 8 Ohm: 2x100W.
Utgangseffekt 4 Ohm: 2x200W.
Utgangseffekt 2 Ohm: 2x300W.
Phono inngang: MM/MC.
RCA innganger: 3.
XLR Inngang: 1.

Pre-Out: 1.
Inngangsimpedans: 47 KOhm.
Hodetelefonutgang: Klasse-A. 16 Ohm, 500mW. 32 Ohm, 1W, 300 Ohm. 600 mVRMS.
Fjernkontroll: Alu.
Mål: 92x445x400 mm.

Vekt: 14 Kg.                                                                                                                                  Pris: 41,000.-

• Spesifikasjoner

2. RCA inputs
4. XLR inputs
1. Input impedance 47KOhm
Power on 8Ω load. 80W @ 1% THD + N
Power on 4Ω load. 160W @ 1% THD + N
Power on 2Ω load. 300W @ 1% THD + N
Sensitivity(8Ω output nominal power). 490mVRMS
Frequency Response(Att. 0dB, -3dB band) 80KHz
Output resistance(2Ω nominal power and 1kHz) 0.17Ω
Input Noise(Band limits 0Hz-80kHz/A-weighted) =30µV/=10µV
SNR =110 dB
Standby power consumption(230VAC) 0.7W
Dimensions(HxWxD) 120x445x390 mm

Weight 15.5 Kg                                                                                                                         Pris: 49,990.-

• Spesifikasjoner

Channels: 2
RCA inputs: 3
XLR inputs: 2
Input impedance: 47KOhm
Maximum input signal: 6Vrms
Power on 8Ω load: 150W @ 1% THD + N
Power on 4Ω load: 300W @ 1% THD + N
Power on 2Ω load: 500W @ 1% THD + N
Sensitivity(8Ω output nominal power): 720Rrms
Frequency Response(Att. 0dB, -3dB band): 90KHz
Output resistance(2Ω nominal power and 1kHz): 0.2Ohm
Input Noise(Band limits 0Hz-80kHz/A-weighted): =20µV/=10µV
SNR: =100 dB
Standby power consumption(230VAC): 0.7W
Dimensions(HxWxD): 168x450x550 mm
Weight: 31 Kg.                                                                                                                             Pris: 92,000.-

EAM lab

På lager i svart

• Rms effekt 8 ohm 270 + 270 W
• Rms effekt 4 ohm 400 + 400 W

• Thd full effekt 4 ohm < 0,03%

• THD + N > 115db

• Freq. Resp. 10hz - 40 khz +/- 0,5 dB

• DF-> 250 ved 70 hz 8ohm

• XLR-inngangssensoritet 47 Kohm / 2,8 Vrms• RCA-inngangssensoribilitet 47 Kohm / 2,8 Vrms• RCA-inngangssensoritet 47 Kohm / 2,8 Vrms• RCA-inngangssensori 47 Kohm / 2,8 Vrms• RCA-inngangssensoribilitet 47 Kohm / 2,8 Vrms

• RCA-inngangssensoribilitet 22 kohm / 1,4 Vrms

• Inaktiv strøm standby 1W

Full effekt 1100 W

• Dimensjon 420 * 410 * 210 mm

• Vekt 42 Kg.                                                                                                                                Pris 73,990.- 

Kommer snart  på lager i svart                                                                              

• Continuos power 60 / 120 Wrms 8/4 ohm in pure class  A
  

5 input 1 XLR 47Kohm / 4 RCA 22Kohm
Input sensivity 1.2 Vrms
D.F >100 to 8 ohm at 100 Hz
Signal to noise ratio >100db
Crest factor 18db
Channel separation 80db
slew/rate 20V/us
freq response 5 hz - 80Khz +/- 0.2db
consumption stand-by 1W
idle 1 20W
full power 240W (full signal music to 4 ohm load)
weigth e dimension 48*43*25 cm 42 Kg.                                                                                   Pris 73,990.-

Kommer snart på lager i svart

• Rms effekt 8 ohm 200 + 200
• Rms effekt 4 ohm 350 + 350

• Thd full effekt 4 ohm < 0,03%

• THD + N > 108db

• Freq. Resp. 10hz - 40 khz +/- 1db

• DF > 250 ved 70 hz 8ohm

• XLR inngangssensoritet 47 Kohm / 2,8 Vrms

• RCA inngangssensoritet 22 kohm / 1,4 vrms

• Inaktiv strøm standby 1W. 

• Phono utgang 3 watt rms ved 32 ohm

• Dimensjon 420 * 380 * 100 mm

• Vekt 25 kg

Features
1 XLR stereo inngang
4 RCA linjeinngang (CD, TUNER, MM, AUX)
PRE-OUT / AMP-IN arbeidsmodus via RCA .
Aluminium infrarød fjernkontroll.    Oled gul skjerm.                                                                   Pris 43,500.-

Kommer snart på lager i svart

EAM lab Musica 102i:  Integrert forsterker.  Dual mono.

100W 8 ohm/ 180W 4 ohm pr kanal

250VA og 26000uf pr kanal

• Thd full power 4 ohm < 0.03%

• THD+N > 108db
• Freq. Resp. 10hz - 40 khz +/- 1db
• Demping factor > 200
• XLR input sensivity 47 Kohm / 2.8 Vrms
• RCA input sensivity 22 kohm / 1.4 Vrms
• Dimension 420 * 380 * 100 mm
• Weight 18 Kg
1 XLR stereo input
4 RCA line input (CD , TUNER , MM , AUX)
PRE-OUT / AMP-IN working mode via RCA ( short rear connector )
Aluminum infrared remote control                                                                             Pris 34,990.-

Parasound

  Power Output - Both channels driven

(0.9% THD, 20 Hz - 20 kHz)
180 watts x 2 @ 8 Ω RMS
270 watts x 2 @ 4 Ω RMS

Current Capacity
45 amps peak per channel

Frequency Response
10 Hz - 100 kHz, +0/-3 dB
20 Hz - 20 kHz, +0/-0.5 dB

Total Harmonic Distortion (THD)
< 0.01 %, average listening levels
< 0.05 %, 160 watts x 2 @ 8 Ω

Interchannel Crosstalk
> 70 dB at 20 kHz
> 78 dB at 1 kHz

Signal to Noise Ratio - IHF A-weighted
Line in: - 103 dB (input shorted)
Digital in: - 106 dB

Amplifier Damping Factor
> 800 at 20 Hz

Preamplifier Stage Input Sensitivity
300 mV in for 1 V at Preamp Output jacks
Total Preamp Stage Gain: 10 dB
Max Output Unbalanced: 7 V
Max Output Balanced: 9 V

Power Amplifier Stage Sensitivity
1 V at Bypass/Amp In for 28 V at Speaker Out
Total Amp Stage Gain: 28 dB

Phono Stage Sensitivity / Input Impedance
MM: 41 dB / 47 k Ω
MC: 54 dB / 47 k Ω or 100 Ω

High & Low Pass Crossover Slope
12 dB per octave

Supported DAC Sampling Rates
USB: up to 384 kHz / 32-bit PCM
DSD Native: DSD 64, DSD 128, DSD 256
DSD over PCM (DoP) at 384 kHz

Coax/Optical: up to 192 kHz / 24-bit PCM

Digital to Analog Converter
ESS Sabre32 Reference ES9018K2M
384 kHz / 32-bit

USB 2.0 Controller
Savitech SA9227, 384 kHz / 32-bit

Headphone Amplifier
Texas Instruments TPA6120A
Output Impedance 10 ohms

Input Impedance

Unbalanced: 24 k Ω
Balanced: 100 k Ω per leg

Preamplifer Output Impedance
Unbalanced: 100 Ω
Balanced: 470 Ω per leg

Dimensions
Width: 17-1/4" (437 mm)
Depth: 16-1/4" (413 mm)
Depth, with cables 17-1/4" (437 mm)
Height, with feet: 5-7/8" (150 mm)
Height, without feet: 5-1/4" (133 mm), 3U

Net Weight
33 lb. (15 kg)

Shipping Weight
45 lb. (20.4 kg)

Power Requirement
Standby: 0.5 watts
Idling power: 70 watts
Maximum: 750 watts
110-125 VAC 60 Hz or 220-250 VAC 50 Hz                                                                   43,490.- 

  Power Output - Both channels driven

(0.05% THD, 20 Hz - 20 kHz)
110 watts x 2 @ 4 Ω or 8 Ω (RMS)

Power Output - Both channels driven
(1% THD, 20 Hz - 20 kHz)
125 watts x 2 @ 4 Ω or 8 Ω (RMS)

Frequency Response:
20 Hz - 20 kHz, +0 / -0.05 dB
10 Hz - 80 kHz, +0 / -3 dB

Total Harmonic Distortion (20 Hz - 20 kHz):
< 0.05 %, (110 watts, 8 Ω)

Interchannel Crosstalk:
-75 dB at 20 kHz
-85dB at 1 kHz

Preamp Output:
250mv = 1V output
Total gain = 12 dB (volume set to 100)
Unity gain = Volume set to 76
Maximum output = 3.5V

Phono Stage Gain / Input Impedance:
MM: 40 dB / 47 k Ω
MC: 50 dB / 100 Ω

Line Level Input Impedance: 24k Ohms

Preamp Output Impedance: 470 Ohms

S/N Ratio - Line Inputs:
> 100 dB, input shorted, IHF A-weighted

S/N Ratio - Digital Inputs:
> 110 dB, input shorted, IHF A-weighted

DAC IC: Burr-Brown PCM1798

DAC Maximum Sampling Rates (PCM only):
USB: 96kHz - 24 bit
Optical: 192kHz - 24 bit
Coax: 192kHz - 24 bit

DC Trigger Output: 12 Vdc, 50mA

AC Power Requirement:
Standby: 0.5 watts
Idling: 15 watts (no music playing)
Typical: 50 watts (music playing)
Maximum: 300 watts
100-250 VAC 50/60 Hz (automatic)

Dimensions:
Width: 17.25" (438 mm)
Depth: 14.75" (375 mm)
Depth: 16.75" (425 mm) with cables connected
Height, with feet: 2.5" (63.5 mm)
Height, without feet: 1.75" (44.5 mm), 1U
Rack mounting requires RMK-11(sold separately)

Weight:
Net: 11.5 lbs (5.2 kg)

Shipping: 17.5 lbs (7.9 kg)                                                                                                   18,490.-