Stativhøyttalere

Skriv inn undertittel her

Skriv inn tekst her

AERIAL ACOUSTICS

Exceptional Performance

Over 40 years of development and design experience combined with a lifelong passion for music and its reproduction yields products that will transform your music and film experience. Music and Film should immerse you with clarity and dynamic range, regardless what room you are in, or where you wish to display your speakers.Aerial Acoustics combines years of experience in custom integration with the best installation dealers. Feel free to call us and discuss your designs and how we can work together to fill your home environment with culture beautifully 

Aerial 5T        Stand 5800.-  Finish:  Rosenut/Black metallic Kr 48.000.-

Frequency Response 48 Hz - 25 kHz +/- 2 dB

Sensitivity 87 dB at 2.83 Vrms and 1.0 meter on axis
Impedance 4 ohms nominal, 3 ohms minimum, low reactance
Power Requirements 25 to 200 watts (8 ohm rating) recommended
Woofer 6.7″ long-stroke design with Papyrus blend cone, large voice coil, dual magnets and cast frame
Tweeter 1″ woven soft ring dome with dual magnets, non-resonant chamber, machined aluminum face plate
Crossover 2.7 kHz. Premium components, polypropylene capacitors, silver solder, Teflon wiring
Cabinet Inert construction with stressed multi-layer curved walls, extensive bracing and wool damping
Port Front facing with smooth laminar flow for extended bass response on shelves or stands within 2′ of walls
Finish Architectural veneers with 4 priming layers and 10-layer hand-polished hard high glosss
Connectors 4 binding posts with jumpers for single-wire, bi-wire or bi-amp use.
Hardware 4 adjustable spikes with black spike covers to protect furniture
Dimensions deep including grille 380 x 200 x 323
Weight 23 pounds each, 56 pounds per pair packed.

På lager i Glossy rosewood.


Aerial 7LCR                                                                                                                             Kr 48.000.-

Frequency Response 60 Hz - 25 kHz +/- 2 dB
Sensitivity 87 dB at 2.83 Vrms and 1.0 meter on axis
Impedance 4 ohms nominal, 3 ohms minimum, low reactance
Power Requirements 25 to 300 watts (8 ohm rating) recommended
Woofers 2 x 6.7″ long-stroke design with aluminum cones, large voice coils, large magnets and cast frames
Midrange 5″ cast frame design with strong acceleration-factor dual magnets and special Papyrus cone
Tweeter 1″ woven soft ring dome with dual magnets, non-resonant chamber, machined aluminum face plate
Crossover 600 Hz and 3.5 kHz. Premium components, polypropylene capacitors, silver solder, Teflon wiring
Controls 2 x 3-position rotary switches for fine midrange and tweeter adjustment and boundary compensation
Cabinet Multi-layer stressed and curved walls with internal bracing and wool insulation
Baffle 0.5″ thick by 8″ square inert aluminum midrange-tweeter baffle rotatable for vertical or horizontal use
Grille Curved grille with magnetic mounting
Finish Nero metallic black paint
Connectors 2 binding posts
Hardware 2 wall brackets with studs for vertical or horizontal mounting on-wall or in-wall
Dimensions deep including grille 965 x 204 x 122
Weight 35 pounds each. 46 pounds packed.
Nero Metallic Black


Aerial LR5                    Stands  15.000.-                                                                             Kr  108.000.-   Ebony 114,000.-

Frequency Response 28Hz to 25kHz ±2dB, -6dB at 23Hz
Dispersion 30Hz to 15kHz +0, -3dB from axial response 45 degree horizontal measurement window
Sensitivity 89dB for 2.83 volts at 1 meter on axis
Impedance 4Ω nominal, 3Ω minimum, low reactance
Power Requirement 25 watts minimum, 100 or more recommended
Woofers Twin 7.1″ (180mm) with cast magnesium frame, rigid bilaminate composite cones, large magnets, 1.5″ coils, long and linear Xmax
Midrange 5.9″ (150mm) with cast magnesium frame, special Papyrus blend cone, copper pole sleeve, dual magnets1.25″ coil, long and linear Xmax
Tweeter 1.0″ (25mm) with thick machined aluminum plate, soft ring-dome design with machined wave guide, dual magnets, 1.0″ coil, copper pole sleeve
Crossovers Fourth order acoustic Linkwitz-Riley at 400 Hz and 3,000 Hz crossover frequencies, 2 physically separate networks on glass-epoxy PCBs, bi-wirable and biampable, high-purity copper wiring and silver solder, premium passive components
Cabinet 9 layer laminated, curved, stressed MDF walls, 7 interlocked full-size braces, tongue and groove joints, 2-piece curved and damped baffle, architectural veneers
Finishes Gloss Rosenut, Nero Metallic Black
Grille Cloth covered curved steel with hexagonal windows, 8 Neodymium magnets, no visible mounting hardware
Connections Four gold-plated binding posts with copper jumpers, bi-wire and bi-amp capable
Included Accessories Nero metallic black base, adjustable feet, adjustable spikes, floor protectors
Dimensions HWD 1130 × 245 × 390mm
Weight Each 44kg - 70kg packed


Amphion

Argon 3S                                                                                                          Pris fra 36,000.- - 38,400.-

Operating principle

Two-way, passive radiator

Drivers

1" titanium tweeter
6½" aluminum woofer

Crossover point

1600 Hz

Impedance

8 Ω

Sensitivity

87 dB

Frequency response

38 - 25.000 Hz -6dB

Power recommendation

50 - 150 W

Measurements

380 x 191 x 305 mm

Weight

10 kg (22 lbs)


Argon 1                                                                                                                   Pris fra 19,200.- - 20,400.-

Operating principle

Two-way, vented

Drivers

1″ titanium tweeter
5¼" aluminum woofer

Crossover point

1600 Hz

Impedance

8 Ω

Sensitivity

86 dB

Frequency response

45 - 25.000 Hz -6dB

Power recommendation

25 - 150 W

Measurements

316 x 160 x 265 mm

Weight

7 kg (15 lbs)


Argon 0                                                                                                           Pris fra 15,600.- - 16,800.-

Operating principle

Two-way, vented

Drivers

1" titanium tweeter
4½" aluminum woofer

Crossover point

1600 Hz

Impedance

8 Ω

Sensitivity

86 dB

Frequency response

50 - 25.000 Hz -6dB

Power recommendation

25 - 120 W

Measurements

259 x 132 x 220 mm

Weight

5 kg (11 lbs)


Helium 510.                                                                                                        Pris fra 15,600.- - 16,800.-

Operating principle

Two-way, vented

Drivers

1″ titanium tweeter
5¼" paper woofer

Crossover point

1600 Hz

Impedance

8 Ω

Sensitivity

86 dB

Frequency response

48 - 25.000 Hz -6dB

Power recommendation

20 - 100 W

Measurements

316 x 160 x 265 mm

Weight

6 kg (13 lbs)


Helium 410.                                                                                                          Pris fra 12,000.- - 13,600.-

Operating principle

Two-way, vented

Drivers

1″ titanium tweeter
4½" paper woofer

Crossover point

1600 Hz

Impedance

8 Ω

Sensitivity

86 dB

Frequency response

52 - 25.000 Hz -6dB

Power recommendation

20 - 80 W

Measurements

259 x 132 x 220 mm

Weight

4 kg (9 lbs)


Audio Solutions

PERFECTION

Development of these fine speakers is a true challenge. We combine laws of physics with design, manufacturing stability and customers' needs to make perfect speakers. Every smallest part is hand crafted and inspected for any flaws.

Audio Solutions Vantage B                                                                                       Pris 540,000.-

Dimensions (HxWxD) : 1281 mm x 392 mm x 553 mm; 50.4 x 15.4 x 21.8in

Weight : 50 kg/110 lbs each

Sensitivity : 90 dB @ 2.83V 1m

Recommended power amplifier : 30-400 W rms

Impedance : nominal 4,0 ohms;

Crossover frequency : 150, 8000 Hz

Frequency response (in-room environment) : 30-30000 Hz

Drivers : 2,5 cm beryllium dome tweeter, 17 cm Egyptian Papyrus mid, 22 cm paper woofer


Audio Solutions Virtuoso B                                                                                Pris fra 156,000 - 187,500.-

Virtuoso B Stand                                                                                                      Pris  39,600.-

Dimensions (HxWxD) : 450mm x 297mm x 478mm

Dimensions with stand (HxWxD) : 1225mm x 391mm x 547mm

Weight without stand : 23 kg

Weight with stand : 37 kg

Shipping weight : 60 kg/

Sensitivity : 91.5 dB @ 2.83V 1m

Nominal power handling : 130 W rms

Maximum unclipped power handling : 260 W;

Impedance : nominal 4,0 ohms

Crossover frequency : 500 Hz; 7000 Hz

Frequency response (in-room environment) : 30-30000 Hz

Drivers : 3cm silk dome tweeter, 16.5cm Hard Pulp paper cone mid, one 19cm Hard Pulp cone bass driver firing down


Audio Solutions Figaro BL2                                                                                                        Pris 52,200.-

SPECIFICATION

Dimensions (HxWxD) : 400mm x 265mm x 402mm; 15.75 x 10.43 x 15.83in

Weight : 15 kg/33 lbs each

Shipping weight : 18 kg/39.7 lbs each

Sensitivity : 90.5 dB @ 2.83V 1m

Suggested amp power : 10-200 W;

Impedance : nominal 4,0 ohms;

Crossover frequency : 4000 Hz

Frequency response (in-room environment) : 39-25000 Hz

Drivers : 19mm silk dome tweeter, 18.3cm ER paper cone mid-bass driver


Audio Solutions Figaro B  2                                                                                                       Pris 39,000

 SPECIFICATION

Dimensions (HxWxD) : 337mm x 223mm x 339mm; 13.27 x 8.78 x 13.35in

Weight : 10 kg/22 lbs each

Shipping weight : 12 kg/26.4 lbs each

Sensitivity : 89.5 dB @ 2.83V 1m

Suggested amp power : 5-150 W;

Impedance : nominal 4,0 ohms;

Crossover frequency : 4000 Hz

Frequency response (in-room environment) : 42-25000 Hz

Drivers : 19mm silk dome tweeter, 15.2cm ER paper cone mid-bass driver


Audio Solutions Overture O302B                                                                           Pris fra 18,600 - 22,320.-

Dimensions (HxWxD) : 360mm x 210mm x 330mm; 14.4 x 8.3 x 13 in

Weight : 9 kg/19 lbs each

Shipping weight : 12 kg/26 lbs each

Sensitivity : 90 dB @ 2.83V 1m

Nominal power handling : 70 W rms

Maximum unclipped power handling : 140 W;

Impedance : nominal 4,0 ohms

Crossover frequency : 3000 Hz

Frequency response (in-room environment) : 47-26000 Hz

Drivers : 2,5 cm silk dome tweeter, 15.2 cm ER paper cone mid-bass driver


ELAC

Innovation, technology, craftsmanship & superior performance backed by 90 years of excellence.

Elac Vela BS 403                                                                                                                   Kr 29,980.-


Elac NAVIS ARB-51.  Aktive høyttalere                                                                              Kr 25,980.-


Elac CARINA BS 243.4                                                                                                         Kr 14,580.-


Elac Debut Reference DBR62.                                                                                               Kr 7,180.-

På lager i valnøtt med svart front


Fischer & Fischer

Kommer snart på lager

Frequency response (+/- 3 dB)45 - 25.000 Hz

Impedance4 ohms

Sensitivity86 dB (1 W / 1 m)Max. acoustic pressure105 dB

Frequency dividing network2nd order impedance corrected filterFunction principlebass reflexBass and midrange systemone long excursion cone speaker 145 mm alloy cone, special coatedMidrange and treble-systemone dome tweeter 28 mmCabinetmanufactured of 15 / 20 mm thick natural slateDimensions (H x W x D)330 x 190 x 250 mmWeight17,5 kg.

                                                                                                                             Pris SN 40,000.-

                                                                                                                                    SL 48,500.-


Frequency response (+/- 3 dB) 60 - 30.000 Hz
Impedance 4 ohms
Sensitivity 85 dB (1 W / 1 m)
Max. acoustic pressure 105 dB
Function principle bass reflex
Bass-midrange system 100 mm long piston bass-midrange speaker with paper membrane
Treble system 22 mm silk dome tweeter and neodymium magnet system
Connecting terminal Single Wire
Cabinet material 12 / 20 mm thick low-resonance natural slate
Dimensions slate cabinet (H x W x D) 200 mm x 130 mm x 200 mm
Weight 7,1 kg.                                                                                                        Pris 37,000.- 


Ophidian

Mojo 2
Mojo 2

Mojo 2

Funksjoner

• Dobbel 115 mm belagt papirmidbass med kraftige motorsystemer

• 27mm neodym høyfrekvent enhet med en Sonolex belagt stoff membran

• AEROFLEX-portsystem for nøyaktig kontrollert bassytelse

• Avstivet og optimalisert skap bygget i Storbritannia

• Avtakbare magnetiske beskyttelsesgitter

Spesifikasjoner

• Frekvensrespons - 52Hz til 25khz (-3dB)

• Følsomhet - 86dB (2.83v)

• Anbefalt effekt - 40 til 120 watt

• Impedans - 4 ohm

• Dimensjoner - 286mm H x 158mm B x 220mm D (inkl. gitter)

• Vekt - 4,4 kg.                                                                                                                 Pris 19,690.-


Minimo 2
Minimo 2

Minimo 2

Funksjoner

• 115 mm belagt papir midbass med kraftig motorsystem

• 27mm neodym høyfrekvent enhet med en Sonolex belagt stoff membran

• AEROFLEX-portsystem for nøyaktig kontrollert bassytelse

• Avstivet og optimalisert skap bygget i Storbritannia

• Avtakbare magnetiske beskyttelsesgitter

Spesifikasjoner

• Frekvensrespons - 53Hz til 25khz (-3dB)

• Følsomhet - 85dB (2.83v)

• Anbefalt effekt - 40 til 80 watt

• Impedans - 4 ohm

• Dimensjoner - 210mm H x 132mm B x 190mm D (inkl. gitter)

• Vekt - 2,6 kg.                                                                                                                Pris 15,475.-


PMC

Twenty5.22i
Twenty5.22i

Available Finishes:Walnut, Diamond Black, Oak, White Silk
Crossover Frequency:1.7kHz
Dimensions:H 410mm (16.1") x W 192mm (7.6") x D 373mm (14.7") incl. binding posts (+9mm grille)
Drive Units:LF PMC 6.5"/170mm long-throw g-weave™ cone with cast alloy chassis HF PMC/SEAS®, 19mm twenty5i series, SONOMEX™ fabric soft dome, Ferrofluid cooled, with 34mm surround and dispersion grille
Effective ATL™ Length:2m (6.5ft)
Frequency Response:39Hz - 25kHz
Impedance:8 Ohm
Input Connectors:One pair 4mm binding posts
Recommended Amp Power:15 - 200W
Recommended Drive Unit Torque Settings:HF: 0.6Nm LF: 0.75Nm
Weight:10kg (22 lbs ea.)                                                                                           Pris: 43,490.-


Twenty5.21i
Twenty5.21i

Available Finishes: Walnut, Diamond Black, Oak, White Silk

Crossover Frequency: 1.7kHz

Dimensions: H 340mm 13.4" x W 162mm 6.4" x D 284mm 11.2" incl. binding posts (+9mm grille)

Drive Units: LF PMC 5.5"/140mm long-throw g-weave™ cone with cast alloy chassis

HF PMC/SEAS®, 19mm twenty5i series, SONOMEX™ fabric soft dome, Ferrofluid cooled, with 34mm surround and dispersion grille

Effective ATL™ Length: 1.72m 5.6ft

Frequency Response: 46Hz - 25kHz

Impedance: 8 Ohm

Input Connectors: One pair 4mm binding posts

Recommended Amp Power: 25 - 150W

Recommended Drive Unit Torque Settings: HF: 0.6Nm LF: 0.75Nm

Weight: 6kg (13.2 lbs ea.)                                                                                         Pris: 28,390.-


Gold
Gold

Available Finishes: Jet Black
Crossover Frequency:2kHz
Dimensions:H 290mm 11.4" x W 155mm 6.1" x D 234mm 9.19" (+ grille)
Drive Units:LF - PMC Doped 140mm cast alloy chassis
HF - 27mm fabric soft dome
Effective ATL™ Length:1.5m 4.92ft
Frequency Response:50Hz-25kHz
Impedance:8 Ohms
Input Connectors:2 pairs 4mm sockets
sensitivity:87dB 1w 1m
Weight:4.5kg (9.9lbs)                                                                                                Pris: 19,990.-